General Notes for Magnecor Ignition Leads

This catalogue lists cable sets for vehicles available in the UK and Europe, although we list a number of non-UK/Europe models. We have tried to be exact as possible in our applications (with description and lead set accuracy) but there may be some differences in vehicle models between various countries. If you want leads for a vehicle located outside of the UK/Europe, or your vehicle or engine has been privately imported into the UK/Europe, or if you need a custom lead set, please be prepared to provide as much information as possible about the application at the time you contact us. We also have an ordering guide, which gives instructions on how to measure leads etc.- please contact us if you would like one.

Some sets are only available in our KV85 Competition 8.5mm cable, even though the original size is 7mm. We do this because these engines sometimes experience serious EMI problems (particularly on modified engines) and KV85 Competition 8.5mm cable is the best choice.

Most late model Toyota and Mitsubishi engines, are supplied with 5mm diameter original cable. We do not manufacture a 5mm cable because we have found the only way to get proper EMI suppression, sufficient insulation and performance for modified engines is to use larger diameter conductors and insulation. Any engine with original 5mm cable will require some extra work to correctly fit and loom our larger size cables.

Our USA and Australian assembly plants use different part numbering systems to the UK .

Technical or vehicle application advice:

We are always willing to help with technical or vehicle application questions; please feel free to contact us by telephone, e-mail or fax.

PLEASE NOTE:

• All lead sets supplied with numbering sleeves and cable separators where applicable.

• All sets are made to standard manufacturer specification - please advise if coil and/or distributor have been relocated, modified or changed.

• Engine codes (not engine numbers - although may be part of the engine number) are very important, please supply the code when ordering.

• High temperature plug boots are supplied as standard on certain sets, should you require them please contact us for verification or prices.

• For R-100 10mm Racing sets, please call for information on price and availability.

• Black nylon lead/cable separators are available in 2, 3 and 4 hole versions.